Clone troubleshooting

Why is my clone's stem turning brown or mushy?

Last reviewed by The Clone Supply grow team

Quick answer

A brown, soft or mushy stem near the base of a clone usually means stem rot or damping off, a fungal problem caused by constantly wet medium, stagnant air and warm, humid conditions. Catch it early by drying out the medium, improving airflow, and separating the plant. A stem that has collapsed and turned slimy rarely recovers.

Signs to look for

  • Brown or dark band at the base of the stem
  • Stem feels soft, pinched or slimy
  • Plant suddenly falls over or wilts at the base
  • Musty or sour smell from the plug

Common causes

1.Overwatering

Medium that never dries out is the top cause. Fungi like Pythium thrive in saturated plugs.

2.Stagnant, humid air

A dome left fully closed for days without venting traps moisture around the stem.

3.Warm water and roots

Root zones or reservoirs above about 80°F hold less oxygen and favor rot organisms.

4.Planting too deep

Burying the stem in wet medium higher than it sat in the plug keeps it damp and prone to rot.

How to fix it

  1. 1

    Isolate the plant

    Move it away from healthy plants so spores and fungus gnats do not spread.

  2. 2

    Stop watering

    Let the medium dry noticeably before the next watering. Remove standing water from trays.

  3. 3

    Vent the dome

    Open vents or remove the dome for part of the day and add a gentle fan nearby, not blowing directly on the plant.

  4. 4

    Check the damage

    If only a small spot is discolored and the stem is still firm, the plant may pull through. If it is collapsed and slimy, it is unlikely to recover.

  5. 5

    Use a beneficial root product

    A beneficial microbe drench, such as one containing Bacillus or Trichoderma, can help protect roots on a plant that is still firm.

  6. 6

    Clean up

    Discard plants that do not survive, along with their medium, and clean trays and domes before reusing them.

How to prevent it

  • Let the top of the medium dry before every watering
  • Vent humidity domes daily
  • Keep the root zone around 72 to 78°F, not hotter
  • Plant at the same depth the clone sat in its plug
  • Use clean trays and fresh medium

When to contact us

If a clone arrives with a brown, rotten or mushy stem, it is covered. Contact us within 48 hours of delivery with your order number and clear photos of the plant and the box. Rot that develops later from watering or humidity is not covered.

Questions

Is a brown woody stem the same as rot?

No. Older stems can turn tan and woody, which is healthy and firm. Rot is soft, dark and often slimy.

Can I take a cutting from a clone with stem rot?

You can try cutting a healthy top, but it must root from scratch. Any plant tissue with rot should be discarded.

This is general growing and store information. Results depend on your setup, and you are responsible for following the cultivation laws where you live.